Chwarren Cebl Metel Aml-twll
Chwarren Cebl Metel Aml-twll
Rhagymadrodd
Defnyddir chwarennau cebl yn bennaf i glampio, gosod, amddiffyn y ceblau rhag dŵr a llwch.Fe'u cymhwysir yn eang i feysydd fel byrddau rheoli, cyfarpar, goleuadau, offer mecanyddol, trên, moduron, prosiectau ac ati.Gallwn ddarparu chwarennau cebl metel aml-dwll i chi wedi'u gwneud o bres nicel-plat (Gorchymyn Rhif: HSM/nxd), dur gwrthstaen (Rhif Gorchymyn: HSMS/nxd) ac alwminiwm (Rhif Gorchymyn: HSMAL/nxd).
Mae Nxd: N yn cyfeirio at nifer y tyllau, mae D yn cyfeirio at ddiamedr twll.
| Deunydd: | Corff: pres nicel-plated;sêl: polyamid;selio: rwber wedi'i addasu |
| Amrediad Tymheredd: | Isafswm -40℃,Uchafswm 100℃,Tymor byr 120℃ |
| Gradd amddiffyn: | IP68 gydag O-ring addas o fewn ystod clampio penodedig |
| Priodweddau: | Gwrthwynebiad i ddirgryniad ac effaith, yn unol ag IEC-60077-1999. |
| Ceisiadau: | Adeilad peiriannau, offer trydan, cwpwrdd rheoli trydan |
| Tystysgrifau: | CE |
Manyleb
(Cysylltwch â ni am ragor o wybodaeth os oes angen meintiau eraill arnoch nad ydynt wedi'u cynnwys yn y rhestr ganlynol.)
[Mae edau metrig / Pg / Npt / G ar gael.]
| Chwarren cebl pres â phlat nicel (edau metrig) | |||||||
| Erthygl rhif. | Edau | Maint twll | AG | GL | H | SW1/SW2 | Pecyn |
|
| Dimensiwn | mm | mm | mm | mm | mm | unedau |
| HSM-M16/4×1.4 | M16×1.5 | 4×1.4 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16/2×3 | M16×1.5 | 2×3 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M18/2×3 | M18×1.5 | 2×3 | 18 | 7 | 21 | 17/20 | 32 |
| HSM-M18/4×3 | M18×1.5 | 4×3 | 18 | 7 | 22.5 | 20/20 | 32 |
| HSM-M18/2×4.5 | M18×1.5 | 2×4.5 | 18 | 7 | 22.5 | 20/20 | 32 |
| HSM-M20/3×2.5 | M20×1.5 | 3×2.5 | 20 | 7 | 23 | 20/22 | 32 |
| HSM-M20/6×3 | M20×1.5 | 6×3 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20/3×4 | M20×1.5 | 3×4 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20/2×5 | M20×1.5 | 2×5 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M25/4×6 | M25×1.5 | 4×6 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M25/3×7 | M25×1.5 | 3×7 | 25 | 7 | 26 | 28/30 | 18 |
| HSM-M25/2×8 | M25×1.5 | 2×8 | 25 | 7 | 26 | 28/30 | 18 |
| HSM-M32/6×6.5 | M32×1.5 | 6×6.5 | 32 | 8 | 33 | 40/40 | 8 |
| HSM-M32/4×9 | M32×1.5 | 4×9 | 32 | 8 | 33 | 40/40 | 8 |
| HSM-M40/5×9 | M40×1.5 | 5×9 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-M40/7×9 | M40×1.5 | 7×9 | 40 | 9 | 38.5 | 50/50 | 4 |
| * HSM-M40/6×8 | M40×1.5 | 6×8 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-M40/2×15 | M40×1.5 | 2×15 | 40 | 9 | 38.5 | 50/50 | 4 |
| *HSM-M63/8×10 | M63×1.5 | 8×10 | 63 | 10 | 41 | 58/70 | 2 |
| HSM-M63/6×12 | M63×1.5 | 6×12 | 63 | 10 | 41 | 58/70 | 2 |
| HSM-M63/4×19 | M63×1.5 | 4×19 | 63 | 10 | 44.5 | 75/75 | 2 |
|
|
|
|
|
|
|
|
|
| Chwarren cebl pres â phlat nicel (edau PG) | |||||||
| Erthygl rhif. | Edau | Maint twll | AG | GL | H | SW1/SW2 | Pecyn |
|
| Dimensiwn | mm | mm | mm | mm | mm | unedau |
| *HSM-P09/4×1.4 | PG9 | 4×1.4 | 15.2 | 7 | 22 | 17/17 | 75 |
| HSM-P09/2×3 | PG9 | 2×3 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-P11/2×3 | PG11 | 2×3 | 18.6 | 7 | 21 | 17/20 | 32 |
| *HSM-P11/2×4.5 | PG11 | 2×4.5 | 18.6 | 7 | 22.5 | 20/22 | 32 |
| *HSM-P13.5/3×2 | PG13.5 | 3×2 | 20.4 | 7 | 23 | 22/22 | 32 |
| HSM-P13.5/6×3 | PG13.5 | 6×3 | 20.4 | 7 | 24 | 22/22 | 32 |
| HSM-P13.5/3×4 | PG13.5 | 3×4 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| *HSM-P16/3×3 | PG16 | 3×3 | 22.5 | 7 | 23 | 22/24 | 32 |
| * HSM-P16/3×4 | PG16 | 3×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/4 ×4 | PG16 | 4×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/5×4 | PG16 | 5×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/6×4 | PG16 | 6×4 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P16/2×6 | PG16 | 2×6 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21/4×6 | PG21 | 4×6 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P21/3×7 | PG21 | 3×7 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P21/2×8 | PG21 | 2×8 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29/6×6.5 | PG29 | 6×6.5 | 37 | 8 | 33 | 36/40 | 8 |
| HSM-P29/4×9 | PG29 | 4×9 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-P36/5×9 | PG36 | 5×9 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P36/7×9 | PG36 | 7×9 | 47 | 9 | 38.5 | 50/50 | 4 |
| *HSM-P36/6×8 | PG36 | 6×8 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-P36/2×15 | PG36 | 2×15 | 47 | 9 | 38.5 | 50/50 | 4 |
| *HSM-P48/8×10 | PG48 | 8×10 | 59.3 | 10 | 41.5 | 58/65 | 2 |
| HSM-P48/6×12 | PG48 | 6×12 | 59.3 | 10 | 41.5 | 65/65 | 2 |
| HSM-P48/3×18 | PG48 | 3×18 | 59.3 | 10 | 41.5 | 65/65 | 2 |
