Chwarren Cebl Metel gyda Chraidd Sengl (edau metrig / Pg)
Chwarren Cebl Metel gyda Chraidd Sengl (edau metrig / Pg)
Rhagymadrodd
Defnyddir chwarennau cebl yn bennaf i glampio, gosod, amddiffyn y ceblau rhag dŵr a llwch. Fe'u cymhwysir yn eang i feysydd fel byrddau rheoli, cyfarpar, goleuadau, offer mecanyddol, trên, moduron, prosiectau ac ati.Gallwn ddarparu metel i chichwarennau cebl gyda chraidd sengl wedi'i wneud o bres nicel-plated (Gorchymyn Rhif: HSM.D), dur di-staen (Gorchymyn Rhif: HSMS.D) ac alwminiwm (Gorchymyn Rhif: HSMAL.D).
| Deunydd: | Corff: pres nicel-plated; sêl: FR-TPE; selio: rwber wedi'i addasu |
| Amrediad Tymheredd: | Isafswm -40℃,Uchafswm 100℃ |
| Gradd amddiffyn: | IP68 (IEC60529) gydag O-ring addas o fewn ystod clampio penodedig |
| Priodweddau: | |
| Ceisiadau: | |
| Tystysgrifau: | CE, RoHS |
Manyleb
(Cysylltwch â ni am ragor o wybodaeth os oes angen meintiau neu edafedd eraill nad ydynt wedi'u cynnwys yn y rhestr ganlynol.)
| Erthygl rhif. | Edau | Ystod clampio | AG | GL | (H) | Wrench maint | Pecyn |
|
| Dimensiwn | mm | mm | mm | mm | mm | unedau |
| HSM.D-M12/7 | M12x1.5 | 4~7 | 12 | 6 | 19.5 | 14 | 75 |
| HSM.D-M16/7 | M16x1.5 | 4~7 | 16 | 7 | 19.5 | 18/14 | 75 |
| HSM.D-M16/9.5 | M16x1.5 | 6.5 ~ 9.5 | 16 | 7 | 20.5 | 18 | 75 |
| HSM.D-M18/7 | M18x1.5 | 4~7 | 18 | 7 | 19.5 | 20/14 | 75 |
| HSM.D-M18/9.5 | M18x1.5 | 6.5 ~ 9.5 | 18 | 7 | 20.5 | 20/18 | 75 |
| HSM.D-M20/7 | M20x1.5 | 4~7 | 20 | 7 | 20 | 22/14 | 32 |
| HSM.D-M20/9.5 | M20x1.5 | 6.5 ~ 9.5 | 20 | 7 | 21 | 22/18 | 32 |
| HSM.D-M20/13 | M20x1.5 | 9~13 | 25 | 7 | 23 | 28/26 | 18 |
| HSM.D-M25/9.5 | M25x1.5 | 6.5 ~ 9.5 | 25 | 7 | 21 | 28/18 | 18 |
| HSM.D-M25/13 | M25x1.5 | 9~13 | 25 | 7 | 24 | 28 | 18 |
| HSM.D-M25/17 | M25x1.5 | 13 ~ 17 | 32 | 7 | 23.5 | 28 | 18 |
| HSM.D-M32/13 | M32x1.5 | 9~13 | 32 | 8 | 24.5 | 36/28 | 8 |
| HSM.D-M32/17 | M32x1.5 | 13 ~ 17 | 32 | 8 | 24 | 36/28 | 8 |
| HSM.D-M32/19 | M32x1.5 | 15~19 | 32 | 8 | 25.5 | 36 | 18 |
| HSM.D-M32/22 | M32x1.5 | 18~22 | 32 | 8 | 25 | 36 | 8 |
| HSM.D-M40/19 | M40x1.5 | 15~19 | 40 | 9 | 25 | 45/36 | 8 |
| HSM.D-M40/22 | M40x1.5 | 18~22 | 40 | 9 | 25.5 | 45/36 | 8 |
| HSM.D-M40/25 | M40x1.5 | 21 ~ 25 | 40 | 9 | 28 | 45 | 8 |
| HSM.D-M40/28 | M40x1.5 | 24~28 | 40 | 9 | 27.5 | 45 | 8 |
| *HSM.D-M50/25 | M50x1.5 | 21 ~ 25 | 50 | 9 | 28 | 55/45 | 8 |
| *HSM.D-M50/28 | M50x1.5 | 24~28 | 50 | 9 | 27.5 | 55/45 | 8 |
| HSM.D-M50/33 | M50x1.5 | 28~33 | 50 | 9 | 27.5 | 55 | 8 |
| HSM.D-M50/37 | M50x1.5 | 32 ~37 | 50 | 9 | 29.5 | 55 | 8 |
| *HSM.D-M50/40 | M50x1.5 | 35 ~ 40 | 50 | 9 | 32 | 55 | 8 |
| *HSM.D-M63/40 | M63x1.5 | 35 ~ 40 | 63 | 10 | 32 | 70/55 | 2 |
| *HSM.D-M63/46 | M63x1.5 | 40 ~ 46 | 63 | 10 | 35 | 70 | 2 |
| *HSM.D-M63/51 | M63x1.5 | 45~51 | 63 | 10 | 35 | 70 | 2 |
