Cnau Clo Metel (edau metrig / Pg / G)
Cnau Clo Metel (edau metrig / Pg / G)
Rhagymadrodd
Gallwn ddarparu cnau clo metel i chi wedi'u gwneud o bres nicel-plated (Gorchymyn Rhif: GM), dur di-staen (Gorchymyn Rhif: GMS) ac alwminiwm (Rhif Gorchymyn: GMAL).
| Deunydd: | Corff: pres nicel-plated |
| Amrediad Tymheredd: | Isafswm -40℃,Uchafswm 100℃ |
| Tystysgrifau: | CE, RoHS, UL |
Manyleb
(Cysylltwch â ni am ragor o wybodaeth os oes angen meintiau eraill arnoch nad ydynt wedi'u cynnwys yn y rhestr ganlynol.)
| Cnau Clo pres â phlat nicel (edau M) | ||||
| Erthygl rhif. | Edau | maint wrench | trwch | unedau pecyn |
|
| Dimensiwn | mm | mm |
|
| GM-M10 | M10×1.0 | 12 | 2.5 | 50 |
| GM-M12 | M12×1.5 | 15 | 2.8 | 50 |
| GM-M16 | M16×1.5 | 19 | 2.8 | 50 |
| GM-M18 | M18×1.5 | 21 | 3 | 50 |
| GM-M20 | M20×1.5 | 23 | 3 | 50 |
| GM-M22 | M22×1.5 | 26 | 3 | 50 |
| GM-M24 | M24×1.5 | 28 | 3.5 | 50 |
| GM-M25 | M25×1.5 | 30 | 3.5 | 25 |
| GM-M27 | M27×2.0 | 32 | 4 | 25 |
| GM-M30 | M30×2.0 | 34 | 4 | 25 |
| GM-M32 | M32×1.5 | 36 | 4 | 20 |
| GM-M33 | M33×2.0 | 36 | 4 | 20 |
| GM-M36 | M36×2.0 | 40 | 4 | 20 |
| GM-M40 | M40×1.5 | 45 | 5 | 20 |
| GM-M42 | M42×2.0 | 46 | 5 | 20 |
| GM-M48 | M48×2.0 | 55 | 5 | 20 |
| GM-M50 | M50×1.5 | 55 | 5 | 20 |
| GM-M56 | M56×2.0 | 60 | 5 | 20 |
| GM-M60 | M60×2.0 | 65 | 5 | 20 |
| GM-M63 | M63×1.5 | 70 | 6 | 20 |
| GM-M64 | M64×1.5 | 70 | 6 | 20 |
| Cnau Clo pres â phlât nicel (edau PG) | ||||
| Erthygl rhif. | Edau | maint wrench | trwch | unedau pecyn |
|
| Dimensiwn | mm | mm |
|
| GM-P07 | PG7 | 15 | 2.8 | 50 |
| GM-P09 | PG9 | 18 | 2.8 | 50 |
| GM-P11 | PG11 | 21 | 3 | 50 |
| GM-P13.5 | PG13.5 | 23 | 3 | 50 |
| GM-P16 | PG16 | 26 | 3 | 50 |
| GM-P21 | PG21 | 32 | 3.5 | 25 |
| GM-P29 | PG29 | 40 | 4 | 20 |
| GM-P36 | PG36 | 50 | 5 | 20 |
| GM-P42 | PG42 | 60 | 5 | 20 |
| GM-P48 | PG48 | 65 | 5.5 | 20 |
|
|
|
|
|
|
| Cnau Clo pres â phlât nicel (edau G) | ||||
| Erthygl rhif. | Edau | maint wrench | trwch | unedau pecyn |
|
| Dimensiwn | mm | mm |
|
| GM-G3/8 | G 3/8″ | 20 | 3 | 50 |
| GM-G1/2 | G 1/2″ | 24 | 4 | 50 |
| GM-G3/4 | G 3/4″ | 30 | 4 | 25 |
| GM-G1 | G 1″ | 40 | 5 | 20 |
| GM-G1 1/4 | G 1 1/4″ | 50 | 5 | 20 |
| GM-G1 1/2 | G 1 1/2″ | 55 | 6 | 20 |
| GM-G2 | G 2″ | 65 | 6 | 20 |
| GM-G2 1/2 | G 2 1/2″ | 86 | 8 | 10 |
| GM-G3 | G 3″ | 100 | 8 | 10 |
