Chwarren Cebl Metel tymheredd uchel gyda Chraidd Sengl (edau metrig)
Chwarren Cebl Metel tymheredd uchel gyda Chraidd Sengl (edau metrig)
Rhagymadrodd
Defnyddir chwarennau cebl yn bennaf i glampio, gosod, amddiffyn y ceblau rhag dŵr a llwch. Fe'u cymhwysir yn eang i feysydd fel byrddau rheoli, cyfarpar, goleuadau, offer mecanyddol, trên, moduron, prosiectau ac ati.Gallwn ddarparu metel tymheredd uchel i chichwarennau cebl gyda chraidd sengl wedi'i wneud o bres nicel-plated (Gorchymyn Rhif: HSM.DS), dur di-staen (Gorchymyn Rhif: HSMS.DS) ac alwminiwm (Gorchymyn Rhif: HSMAL.DS).
| Deunydd: | Corff: pres nicel-plated; selio: silicon rubber |
| Amrediad Tymheredd: | Isafswm -50℃,Uchafswm 200℃ |
| Gradd amddiffyn: | IP68 (IEC60529) gydag O-ring addas o fewn ystod clampio penodedig |
| Priodweddau: | |
| Tystysgrifau: | CE, RoHS |
Manyleb
(Cysylltwch â ni am ragor o wybodaeth os oes angen meintiau neu edafedd eraill nad ydynt wedi'u cynnwys yn y rhestr ganlynol.)
| Erthygl rhif. | Edau | Ystod clampio | GL | (H) | Wrench maint | Pecyn |
|
| Dimensiwn | mm | mm | mm | mm | unedau |
| HSM.DS-M16/7 | M16 x 1.5 | 4~7 | 7 | 20.5 | 18 | 75 |
| HSM.DS-M20/10 | M20 x 1.5 | 7 ~ 10 | 7 | 22 | 22 | 32 |
| HSM.DS-M20/13 | M20 x 1.5 | 9~13 | 7 | 22.5 | 26/24 | 18 |
| HSM.DS-M25/13 | M25 x 1.5 | 9~13 | 7 | 23 | 28 | 18 |
| HSM.DS-M25/15 | M25 x 1.5 | 12 ~ 15 | 8 | 24 | 30/28 | 18 |
| HSM.DS-M32/15 | M32 x 1.5 | 12 ~ 15 | 8 | 24 | 30/36 | 18 |
| HSM.DS-M32/18 | M32 x 1.5 | 14 ~ 18 | 8 | 25 | 36 | 18 |
| HSM.DS-M32/22 | M32 x 1.5 | 18~22 | 8 | 27 | 40/38 | 8 |
| HSM.DS-M40/22 | M40 x 1.5 | 18~22 | 9 | 26 | 40/45 | 8 |
| *HSM.DS-M40/25 | M40 x 1.5 | 21 ~ 25 | 9 | 27 | 45 | 8 |
| *HSM.DS-M40/30 | M40 x 1.5 | 25 ~ 30 | 9 | 28 | 50/46 | 8 |
| *HSM.DS-M50/30 | M50 x 1.5 | 25 ~ 30 | 9 | 28 | 50/55 | 8 |
| *HSM.DS-M50/34 | M50 x 1.5 | 29 ~34 | 9 | 29 | 55 | 8 |
| *HSM.DS-M50/37 | M50 x 1.5 | 32 ~37 | 9 | 29 | 55 | 8 |
| *HSM.DS-M56/37 | M56 x 1.5 | 32 ~37 | 9 | 29 | 55/60 | 2 |
| HSM.DS-M56/40 | M56 x 1.5 | 35 ~ 40 | 9 | 32 | 60 | 2 |
| *HSM.DS-M56/43 | M56 x 1.5 | 38~43 | 10 | 32 | 65 | 2 |
| *HSM.DS-M63/43 | M63 x 1.5 | 38~43 | 10 | 31.5 | 65/70 | 2 |
| *HSM.DS-M63/46 | M63 x 1.5 | 41 ~ 46 | 10 | 31.5 | 70 | 2 |
| *HSM.DS-M63/51 | M63 x 1.5 | 45~51 | 10 | 35 | 75 | 2 |
