Chwarren Cebl Metel tymheredd uchel gyda Chraidd Aml (edau metrig / PG)
Chwarren Cebl Metel tymheredd uchel gyda Chraidd Aml (edau metrig / PG)
Rhagymadrodd
Defnyddir chwarennau cebl yn bennaf i glampio, gosod, amddiffyn y ceblau rhag dŵr a llwch. Fe'u cymhwysir yn eang i feysydd fel byrddau rheoli, cyfarpar, goleuadau, offer mecanyddol, trên, moduron, prosiectau ac ati.Gallwn ddarparu chwarennau cebl metel tymheredd uchel i chi gyda chreiddiau aml wedi'u gwneud o bres nicel-plat (Gorchymyn Rhif: HSM.DS-M/nxd), dur di-staen (Rhif Archeb: HSMS.DS-M/nxd) a alwminiwm (Rhif Gorchymyn: HSMAL.DS-M/nxd).
| Deunydd: | Corff: pres nicel-plated; selio: silicon rubber |
| Amrediad Tymheredd: | Isafswm -50℃,Uchafswm 200℃ |
| Gradd amddiffyn: | IP68 (IEC60529) gydag O-ring addas o fewn ystod clampio penodedig |
| Priodweddau: | V0(UL94), yn rhydd o halogen, ffosffor a chadmiwm, |
| Tystysgrifau: | CE, RoHS, UV-ymwrthedd, heneiddio-ymwrthedd. |
Manyleb
(Cysylltwch â ni am ragor o wybodaeth os oes angen meintiau neu edafedd eraill nad ydynt wedi'u cynnwys yn y rhestr ganlynol.)
| Erthygl rhif. | Edau | Ystod clampio | GL | Wrench maint | Pecyn |
|
| Dimensiwn | mm | mm | mm | unedau |
| * HSM.DS-M20/5×2.5 | M20×1.5 | 5×2.5 | 7 | 22 | 32 |
| HSM.DS-M25/3×5 | M25×1.5 | 3×5 | 7 | 28 | 18 |
| * HSM.DS-M25/3×6.5 | M25×1.5 | 3×6.5 | 7 | 30/28 | 18 |
| HSM.DS-M25/4×3.5 | M25×1.5 | 4×3.5 | 7 | 28 | 18 |
| * HSM.DS-M25/4×5 | M25×1.5 | 4×5 | 7 | 28 | 18 |
| HSM.DS-M25/2×8.5 | M25×1.5 | 2×8.5 | 7 | 30 | 18 |
| * HSM.DS-M25/3×7.5 | M25×1.5 | 3×7.5 | 7 | 30 | 8 |
| HSM.DS-M32/3×8.5 | M32×1.5 | 3×8.5 | 8 | 36 | 8 |
| * HSM.DS-M32/5×5.5 | M32×1.5 | 5×5.5 | 8 | 36 | 8 |
| * HSM.DS-M40/5×8.5 | M40×1.5 | 5×8.5 | 9 | 45 | 8 |
| * HSM.DS-M40/3×12.5 | M40×1.5 | 3×12.5 | 9 | 45 | 8 |
| HSM.DS-M50/4×12.5 | M50×1.5 | 4×12.5 | 9 | 50/55 | 8 |
| HSM.DS-M50/5×12.5 | M50×1.5 | 5×12.5 | 9 | 60 | 2 |
| HSM.DS-M50/13×7 | M50×1.5 | 13×7 | 9 | 55 | 2 |
| * HSM.DS-P21/3×6.5 | PG21 | 3×6.5 | 7 | 30 | 18 |
| *HSM.DS-P21/6×6 | PG21 | 6×6 | 7 | 30 | 18 |
| HSM.DS-P29/3×8.5 | PG29 | 3×8.5 | 8 | 40/36 | 8 |
| * HSM.DS-P36/5×8.5 | PG30 | 5×8.5 | 8 | 50/45 | 4 |
| * HSM.DS-P36/3×12.5 | PG31 | 3×12.5 | 8 | 50/45 | 4 |
