Chwarren Cebl EMC (edau metrig / Pg)
Chwarren Cebl EMC (edau metrig / Pg)
Rhagymadrodd
Defnyddir chwarennau cebl yn bennaf i glampio, gosod, amddiffyn y ceblau rhag dŵr a llwch. Fe'u cymhwysir yn eang i feysydd fel byrddau rheoli, cyfarpar, goleuadau, offer mecanyddol, trên, moduron, prosiectau ac ati.Gallwn ddarparu chwarennau cebl EMC i chi wedi'u gwneud o bres nicel-plated (Gorchymyn Rhif: HSM-EMV), dur di-staen (Gorchymyn Rhif: HSMS-EMV) ac alwminiwm (Gorchymyn Rhif: HSMAL-EMV).
| Deunydd: | Corff: pres nicel-plated; sêl: polyamid; selio: rwber wedi'i addasu |
| Amrediad Tymheredd: | Isafswm -40℃,Uchafswm 100℃,Tymor byr 120℃ |
| Gradd amddiffyn: | IP68 (IEC60529) gydag O-ring addas o fewn ystod clampio penodedig |
| Priodweddau: | Gwrthwynebiad i ddirgryniad ac effaith, yn unol ag IEC-60077-1999. |
| Ceisiadau: | Adeilad peiriannau, offer trydan, cwpwrdd rheoli trydan |
| Tystysgrifau: | CE, RoHS |
Manyleb
(Cysylltwch â ni am ragor o wybodaeth os oes angen meintiau neu edafedd eraill nad ydynt wedi'u cynnwys yn y rhestr ganlynol.)
| Erthygl rhif. | Edau | Ystod clampio | AG | GL | (H) | Wrench maint | Pecyn |
|
| Dimensiwn | mm | mm | mm | mm | mm | unedau |
| HSM-EMV-M12 | M12×1.5 | 3 ~ 6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-EMV-M16 | M16×1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-EMV-M18 | M18×1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-EMV-M20 | M20×1.5 | 6~12 | 20 | 7 | 25 | 22/22 | 32 |
| HSM-EMV-M24 | M24×1.5 | 8~14 | 24 | 7 | 24 | 24/27 | 18 |
| HSM-EMV-M25 | M25×1.5 | 10~16 | 25 | 7 | 25.5 | 28/28 | 18 |
| HSM-EMV-M25-D | M25×1.5 | 13 ~ 18 | 25 | 7 | 27 | 30/30 | 18 |
| HSM-EMV-M30 | M30×2.0 | 13 ~ 18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-EMV-M32 | M32×1.5 | 15~22 | 32 | 8 | 29 | 36/36 | 18 |
| HSM-EMV-M32-D | M32×1.5 | 18~25 | 32 | 8 | 34.5 | 40/38 | 8 |
| HSM-EMV-M36 | M36×2.0 | 18~25 | 36 | 8 | 34.5 | 40/40 | 8 |
| HSM-EMV-M40 | M40×1.5 | 22 ~ 30 | 40 | 9 | 37.5 | 45/45 | 4 |
| HSM-EMV-M40-D | M40×1.5 | 22 ~ 32 | 40 | 9 | 40 | 50/50 | 4 |
| HSM-EMV-M48 | M48×2.0 | 22 ~ 32 | 48 | 9 | 40 | 50/52 | 4 |
| HSM-EMV-M50 | M50×1.5 | 30~38 | 50 | 9 | 42 | 58/55 | 2 |
| HSM-EMV-M56 | M56×2.0 | 30~38 | 56 | 9 | 41 | 60/58 | 2 |
| HSM-EMV-M63 | M63×1.5 | 37~44 | 63 | 10 | 42.5 | 65/70 | 2 |
| HSM-EMV-M64 | M64×2.0 | 37~44 | 64 | 10 | 42.5 | 65/70 | 2 |
|
|
|
|
|
|
|
|
|
| HSM-EMV-P07 | PG7 | 3 ~ 6.5 | 12.5 | 6 | 20 | 14/14 | 75 |
| HSM-EMV-P09 | PG9 | 4~8 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-EMV-P11 | PG11 | 5~10 | 18.6 | 7 | 23.5 | 20/20 | 32 |
| HSM-EMV-P13.5 | PG13.5 | 6~12 | 20.4 | 7 | 25 | 22/22 | 32 |
| HSM-EMV-P16 | PG16 | 8~14 | 22.5 | 7 | 24 | 24/24 | 32 |
| HSM-EMV-P21 | PG21 | 13 ~ 18 | 28.3 | 8 | 27 | 30/30 | 18 |
| HSM-EMV-P29 | PG29 | 18~25 | 37 | 8 | 34.5 | 40/40 | 8 |
| HSM-EMV-P36 | PG36 | 22 ~ 32 | 47 | 9 | 40 | 50/50 | 4 |
| HSM-EMV-P42 | PG42 | 30~38 | 54 | 9 | 42 | 58/58 | 2 |
| HSM-EMV-P48 | PG48 | 37~44 | 59.3 | 10 | 42.5 | 65/65 | 2 |
Cais
Gwnewch i ffwrdd ag un rhan fach o wain allanol y cebl wedi'i sgrinio, a thorri'r haen darian i ffwrdd, trowch ddargludydd yr haen darian drosodd a'i lapio y tu allan i'r sêl, dylai ei hyd fod yn hirach na lleoliad y selio. ffoniwch, yna rhowch yn y chwarren cebl a'i droi'n dynn.
Rydym yn awgrymu crafu'r paent a gysylltir â'r chwarren cebl a'r edau i warantu'r dargludedd trydan da.
